miio.integrations.zhimi.airpurifier.airpurifier_miot module
- class miio.integrations.zhimi.airpurifier.airpurifier_miot.AirPurifierMiot(ip: str | None = None, token: str | None = None, start_id: int = 0, debug: int = 0, lazy_discover: bool = True, timeout: int | None = None, *, model: str | None = None, mapping: Dict[str, Dict[str, Any]] | None = None)[source]
Bases:
MiotDevice
Main class representing the air purifier which uses MIoT protocol.
- actions() DescriptorCollection[ActionDescriptor]
Return device actions.
- call_action_by(siid, aiid, params=None)
Call an action.
- configure_wifi(ssid, password, uid=0, extra_params=None)
Configure the wifi settings.
- descriptors() DescriptorCollection[Descriptor]
Return a collection containing all descriptors for the device.
- classmethod get_device_group()
- get_properties(properties, *, property_getter='get_prop', max_properties=None)
Request properties in slices based on given max_properties.
This is necessary as some devices have limitation on how many properties can be queried at once.
If max_properties is None, all properties are requested at once.
- info(*, skip_cache=False) DeviceInfo
Get (and cache) miIO protocol information from the device.
This includes information about connected wlan network, and hardware and software versions.
- Parameters:
bool (skip_cache) – Skip the cache
- raw_command(command, parameters)
Send a raw command to the device. This is mostly useful when trying out commands which are not implemented by a given device instance.
- send(command: str, parameters: Any | None = None, retry_count: int | None = None, *, extra_parameters=None) Any
Send a command to the device.
Basic format of the request: {“id”: 1234, “method”: command, “parameters”: parameters}
extra_parameters allows passing elements to the top-level of the request. This is necessary for some devices, such as gateway devices, which expect the sub-device identifier to be on the top-level.
- send_handshake()
Send initial handshake to the device.
- sensors() DescriptorCollection[PropertyDescriptor]
Return read-only properties.
- set_favorite_level(level: int)[source]
Set the favorite level used when the mode is favorite.
Needs to be between 0 and 14.
- set_led_brightness(brightness: LedBrightness)[source]
Set led brightness.
- set_mode(mode: OperationMode)[source]
Set mode.
- set_property_by(siid: int, piid: int, value: int | float | str | bool, *, value_type: Any | None = None, name: str | None = None)
Set a single property (siid/piid) to given value.
value_type can be given to convert the value to wanted type, allowed types are: int, float, bool, str
- settings() DescriptorCollection[PropertyDescriptor]
Return settable properties.
- status() AirPurifierMiotStatus [source]
Retrieve properties.
- supports_miot() bool
Return True if the device supports miot commands.
This requests a single property (siid=1, piid=1) and returns True on success.
- update_state()
Return current update state.
- retry_count = 3
- supported_models = ['zhimi.airpurifier.ma4', 'zhimi.airpurifier.mb3', 'zhimi.airpurifier.mb3a', 'zhimi.airp.mb3a', 'zhimi.airpurifier.va1', 'zhimi.airpurifier.vb2', 'zhimi.airpurifier.mb4', 'zhimi.airp.mb4a', 'zhimi.airp.mb5', 'zhimi.airp.mb5a', 'zhimi.airp.va2', 'zhimi.airp.vb4', 'zhimi.airpurifier.rma1', 'zhimi.airp.rmb1', 'zhimi.airpurifier.za1']
- timeout = 5
- class miio.integrations.zhimi.airpurifier.airpurifier_miot.AirPurifierMiotStatus(data: Dict[str, Any], model: str)[source]
Bases:
DeviceStatus
Container for status reports from the air purifier.
Mi Air Purifier 3/3H (zhimi.airpurifier.mb3) response (MIoT format):
[ {'did': 'power', 'siid': 2, 'piid': 2, 'code': 0, 'value': True}, {'did': 'fan_level', 'siid': 2, 'piid': 4, 'code': 0, 'value': 1}, {'did': 'mode', 'siid': 2, 'piid': 5, 'code': 0, 'value': 2}, {'did': 'humidity', 'siid': 3, 'piid': 7, 'code': 0, 'value': 38}, {'did': 'temperature', 'siid': 3, 'piid': 8, 'code': 0, 'value': 22.299999}, {'did': 'aqi', 'siid': 3, 'piid': 6, 'code': 0, 'value': 2}, {'did': 'filter_life_remaining', 'siid': 4, 'piid': 3, 'code': 0, 'value': 45}, {'did': 'filter_hours_used', 'siid': 4, 'piid': 5, 'code': 0, 'value': 1915}, {'did': 'buzzer', 'siid': 5, 'piid': 1, 'code': 0, 'value': False}, {'did': 'buzzer_volume', 'siid': 5, 'piid': 2, 'code': -4001}, {'did': 'led_brightness', 'siid': 6, 'piid': 1, 'code': 0, 'value': 1}, {'did': 'led', 'siid': 6, 'piid': 6, 'code': 0, 'value': True}, {'did': 'child_lock', 'siid': 7, 'piid': 1, 'code': 0, 'value': False}, {'did': 'favorite_level', 'siid': 10, 'piid': 10, 'code': 0, 'value': 2}, {'did': 'favorite_rpm', 'siid': 10, 'piid': 7, 'code': 0, 'value': 770}, {'did': 'motor_speed', 'siid': 10, 'piid': 8, 'code': 0, 'value': 769}, {'did': 'use_time', 'siid': 12, 'piid': 1, 'code': 0, 'value': 6895800}, {'did': 'purify_volume', 'siid': 13, 'piid': 1, 'code': 0, 'value': 222564}, {'did': 'average_aqi', 'siid': 13, 'piid': 2, 'code': 0, 'value': 2}, {'did': 'filter_rfid_tag', 'siid': 14, 'piid': 1, 'code': 0, 'value': '81:6b:3f:32:84:4b:4'}, {'did': 'filter_rfid_product_id', 'siid': 14, 'piid': 3, 'code': 0, 'value': '0:0:31:31'}, {'did': 'app_extra', 'siid': 15, 'piid': 1, 'code': 0, 'value': 0} ]
- descriptors() DescriptorCollection[PropertyDescriptor]
Return the dict of sensors exposed by the status container.
Use @sensor and @setting decorators to define properties.
- embed(name: str, other: DeviceStatus)
Embed another status container to current one.
This makes it easy to provide a single status response for cases where responses from multiple I/O calls is wanted to provide a simple interface for downstreams.
Internally, this will prepend the name of the other class to the attribute names, and override the __getattribute__ to lookup attributes in the embedded containers.
- property filter_type: FilterType | None
Type of installed filter.
- property led_brightness: LedBrightness | None
Brightness of the LED.
- property mode: OperationMode
Current operation mode.